Dulora 8W 12-24V AC/DC B22 Clear A60 GLS LED Bulb 4000K Cool White
The Dulora 8W 12-24V AC/DC B22 Clear A60 GLS LED Bulb delivers bright, practical illumination for low-voltage lighting systems where clear visibility and reliable performance are important.
Producing 800 lumens of crisp 4000K Cool White light, this clear glass LED filament bulb offers the light output of a traditional 60W incandescent bulb while using just 8 watts of power.
Designed specifically for 12 to 24 volt AC/DC systems, the Dulora A60 is suitable for caravans, boats, off-grid installations, solar-powered systems, low-voltage kitchens, utility areas, outdoor covered spaces and other applications where a standard B22 bayonet fitting is used.
Bright 4000K Cool White Light
The 4000K Cool White colour temperature provides a clean, neutral-white appearance that is well suited to areas where clear visibility is preferred over a warmer decorative light.
It works particularly well in kitchens, work areas, utility spaces, workshops and other locations where practical task lighting is important.
800 Lumens from Just 8W
Despite consuming only 8W, the Dulora produces approximately 800 lumens of light output, making it a practical replacement for a traditional 60W incandescent globe.
This provides strong general and task lighting while significantly reducing power consumption compared with older incandescent technology.
12-24V AC/DC Low-Voltage Operation
The Dulora A60 is designed specifically for 12-24V AC or DC systems, making it suitable for a wide range of low-voltage lighting applications.
It can be used in compatible caravan, marine, solar, battery-powered, off-grid and low-voltage architectural lighting systems.
Because it operates at low voltage, it is also well suited to applications where lower-voltage lighting systems are specified around wet, outdoor or utility areas.
Clear Glass LED Filament Design
The clear glass envelope exposes the LED filament structure, creating the familiar appearance of a traditional clear incandescent globe while using modern LED technology.
When illuminated, the filament arrangement produces an even, bright light through the clear A60 glass. When switched off, the visible filament design gives the globe a clean and classic appearance.
B22 Bayonet Cap
The B22 bayonet cap suits compatible bayonet lamp holders commonly found in ceiling fittings, pendant lights, wall lights and table lamps.
Always confirm that the fitting operates on 12-24V AC/DC before installation.
CRI 80+ Colour Rendering
With a CRI of 80+, the Dulora provides good colour reproduction for everyday residential, commercial and mobile lighting applications.
Surfaces, finishes and objects appear natural and balanced under the neutral 4000K light.
Non-Dimmable
This globe is non-dimmable and should be used with compatible non-dimming 12-24V AC/DC lighting systems.
Recommended Applications
- Caravans and motorhomes
- Marine and boat lighting
- Solar-powered lighting systems
- Battery-powered lighting systems
- Off-grid installations
- Outdoor covered kitchens
- Utility areas
- Workshops
- Galley kitchens
- Low-voltage commercial lighting
- Pool and spa surrounding areas where suitable low-voltage systems are specified
- Compatible pendant, ceiling and table lamp fittings
Key Features
- 8W LED filament globe
-
800 lumen light output
- 4000K Cool White
-
12-24V AC/DC operation
- B22 bayonet cap
- A60 GLS shape
- Clear glass finish
- CRI 80+
- Non-dimmable
- Approximate 60W incandescent equivalent
- 60mm diameter
- 100mm overall height
- 3-year warranty
Technical Specifications
| Product |
Dulora Clear A60 GLS LED Bulb |
| SKU |
F822-A60-C-12V-40K |
| Base Type |
B22 Bayonet Cap |
| Bulb Shape |
A60 GLS |
| Input Voltage |
12-24V AC/DC |
| Wattage |
8W |
| Brightness |
800 lumens |
| Colour Temperature |
4000K Cool White |
| CRI |
80+ |
| Dimmable |
No |
| Incandescent Equivalent |
Approx. 60W |
| Glass Finish |
Clear |
| Bulb Diameter |
60mm |
| Overall Height |
100mm |
| Warranty |
3 Years |
Important: This bulb operates on 12-24V AC/DC low-voltage systems only and is not suitable for standard 220-240V mains voltage fittings. Always verify the system voltage before installation.
