Mini (5mm) Seamless Dotless CCT Lighting for Modern Interiors
The next generation of LED strip lighting. This COB CCT LED strip light delivers a smooth, dot-free colour output, creating a continuous line of vibrant light without visible hotspots.
Designed for indoor applications, the IP20 rating makes it ideal for dry areas where visual impact matters most—perfect for cabinetry, shelving, and architectural features.
With full CCT colour control, you can customise your lighting to suit any mood, setting, or design vision—from subtle 2700K warm ambient tones to 6500K bold, dynamic colour effects.
Key Features
-
COB CCT Technology – Seamless, dotless colour illumination
-
IP20 Indoor Rated – Ideal for dry, interior applications
-
24V Low Voltage – Safe and easy to install
-
High Flexibility – Easily bends around corners and curves
-
3M Adhesive Backing – Fast, secure installation
-
Super Slim 5mm Profile – Perfect for aluminium channels and tight spaces
Perfect For
- Under cabinet lighting
- TV units & media walls
- Shelving & display lighting
- Retail and commercial fit-outs
- Feature and ambient lighting
To operate the LED strip you will need to connect the strip to a 24 volt constant voltage LED driver. Power Requirements: Assess the total wattage of your LED setup. The driver should supply enough power, typically a bit more than the total LED wattage, to ensure reliability without overloading.
We can supply a LED driver attached to your custom strip upon request to allow for DIY installation. To make this request please “add cart note” to your order.
How to control CCT LED Strip Lights?
If you purchase an CCT LED strip light, you will need additional components to control the functions. There are now three methods to control LED strip lights:
1. Wireless Multifunction Remote Controller:
This is the simplest way to control any LED strip lights, whether it be dimming a single colour strip light or a varying CCT colour LED strip light. The remote control speaks to a receiver that is connected just before the LED Strip light.
2. Wall Panel:
The next option is to control a strip light through a wall control unit. Wall control units can be hard wired or wireless, wireless will act like a remote but be installed permanently on an adjacent wall.
A hard wired wall control is more reliable than a remote as it doesn’t rely on batteries and sending signals over air waves. A hard wired wall control will take longer to install and in some cases cannot be installed if no cable is able to joined to an LED strip light.
3. Smart Wifi Controller:
Smart controllers are constantly being developed and improving a fast rate. To control an CCT strip light through an app or mobile device, new controllers can be purchased and can be connected directly to mobile apps or though additional devices light a Phillips Hue bridge which allows it to then be connected to more mobile apps.
Green Earth can advise and supply your desired controllers. Alternatively, our DIY 5 Meter Kit complete with everything you need - Strip, Driver and Controllers.
Specifications:
Product series SKU: IP205MMCCT
Output Voltage: 24V
Output Power/Wattage Per Meter: 14W/m
Lumens Per Meter: 1260lm/m
CRI: 90+
Support Dimmer: Yes (Phase / DALI / 010V / Zigbee)
Self Adhesive: 3M Adhesive
Driver Type: Constant Voltage (24V)
LED Chip: Cree COB
LED Chips Per Meter: 608/m
IP rating: IP20
Cut Intervals: 26mm (cutting line shown on the LED)
Warranty: 3 Years
Product Dimensions: 5mm (W) x 2.3mm (H)
